제품소개

BLACKBOX BBR1U (Analog I/O)

Brand

Joeco

Content: Joeco THE BLACKBOX BBR1U
(unbalanced analogue I/O)

The BBR1U multi-track recorder brings the high quality recordings and failsafe dependability for which the BLACKBOX Recorder is known to more traditional analogue set-ups.

The BBR1U is designed to plug across the insert points of a standard analogue console via three 25-way female D-type connectors on the rear of the unit. Three 1/4-inch TRS terminated multicore looms can be supplied (please specify with order) for connecting the BLACKBOX Recorder to the console (via TASCAM analogue format). Inside the BBR1U multi-track recorder, relays route the audio signal from input to output in all modes except during playback. This provides an additional level of safety so that in the event of a power failure on the BBR, the audio through the PA will not be affected in live scenarios.

In this model, eight insert returns are also brought out to TRS jacks on the rear of the unit, allowing additional outboard equipment to be plugged into insert points as required.

All BLACKBOX Recorders are designed and built to exacting standards with rugged construction and a suite of unique multi-track audio capture features. The choice of professional users, the BBR1U multi-track recorder is the solution the professional audio industry chooses and trusts. For more information, see below to download the BLACKBOX Recorder brochure, for full information on the entire BLACKBOX range.

Product Detailed Description

JoeCo-Blackbox-Recorder-BBR1U-Rear-Panel-e1483540433730.jpg

BLACKBOX Multi-Track Recorders


General Specifications
Sample rates:	44.1kHz, 48kHz, 88.2kHz, 96kHz
Bit depth:	16 / 24 bit
Local Disk interface:	USB2
Local Disk format:	FAT32
Local File format:	Broadcast WAV (BWAV)
Media	USB2 hard disk (7200rpm recommended), USB2 flash drive – 200x minimum (except for MADI and DANTE systems which have more demanding data rates), SHDC (Class 10 with suitable adapter except MADI and DANTE)
Monitoring	1 x 1/4” TRS jack socket, headphone mix/solo
Physical	19” rack mounted 1U
Dimensions	(425mm x 150mm x 44mm)
Weight	< 2.4kg

Analog Inputs
Levels	-10dBu / +4dBu switchable
Max input level	+22dBu = 0dBFS
A-D conversion	24bit, 96kHz 106dB S/N, 96dB THD+N (typical A-weighted)

Analog Outputs
Levels	-10dBu / +4dBu switchable
Max input level	+22dBu = 0dBFS
D-A conversion	24bit, 96kHz 106dB S/N, 94dB THD+N (typical A-weighted)


Control and Synchronisation
MIDI	1 x 5-pin DIN (open loop) – MIDI time code (MTC) and MIDI machine control (MMC) protocol
LTC	1 x 1/4” TRS jack socket: Frame rates supported: 30fps, 29.97drop fps, 29.97non-drop fps, 25fps, 24fps, 23.98fps
Machine control	1 x 9-pin D, SONY PII protocol
Audio clock synchronisation	2 x RCA sockets AES3 / SPDIF Format, also used for communications to slave units
Footswitch	momentary switch on ring of LTC TRS socket
Keyboard	1 x mini DIN PS2 connector, Standard 102 key
Power	9v – 16V dc (< 25W). 2.1mm dc inlet. PSU supplied

BBR1U Recorder (unbalanced analog I/O) Multi-Track Recorder

Unbalanced i/o via 3 x 25way D-sub connectors

(3 x ¼” TRS multicore looms supplied – TASCAM analogue format).

Designed to plug across the insert points on a standard analogue console

Loop through outputs available on ch 17-24 on ¼” TRS jack sockets for connection

to outboard equipment